dc.creator | Restrepo A.H. | |
dc.creator | Ríos J.M. | |
dc.creator | Arango F. | |
dc.creator | Correa E. | |
dc.creator | Zuleta A.A. | |
dc.creator | Valencia-Escobar A. | |
dc.creator | Bolivar F.J. | |
dc.creator | Castaño J.G. | |
dc.creator | Echeverría F.E. | |
dc.date | 2020 | |
dc.date.accessioned | 2021-02-05T14:57:58Z | |
dc.date.available | 2021-02-05T14:57:58Z | |
dc.identifier.issn | 2683768 | |
dc.identifier.uri | http://hdl.handle.net/11407/5927 | |
dc.description | The effect of speed and milling time on the morphology, crystallite size, and phase composition of Ti Cp powders processed in n-hexane by high-energy ball milling (HEBM) using a E-max Retsch equipment was studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). Lattice parameters, mean crystallite size, lattice strain, and dislocation density were obtained from Rietveld analysis. The XRD and TEM results show that the HEBM process of the Ti Cp promotes the transition from HCP to FCC after 6 h of milling at 1400 rpm. The transformation process could be attributed to the energy generated in the milling process which induces high deformation and presence of high-density dislocations in the powder. Graphical Abstract[Figure not available: see fulltext.]. © 2020, Springer-Verlag London Ltd., part of Springer Nature. | |
dc.language.iso | eng | |
dc.publisher | Springer | |
dc.relation.isversionof | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85089883157&doi=10.1007%2fs00170-020-05991-7&partnerID=40&md5=391843474c4d390f3df4e7ee9da7ce75 | |
dc.source | International Journal of Advanced Manufacturing Technology | |
dc.subject | Allotropic transformation | spa |
dc.subject | High-energy ball milling | spa |
dc.subject | Microstructural analysis | spa |
dc.subject | Titanium | spa |
dc.title | Characterization of titanium powders processed in n-hexane by high-energy ball milling | |
dc.type | Article | eng |
dc.rights.accessrights | info:eu-repo/semantics/restrictedAccess | |
dc.publisher.program | Ingeniería de Materiales | spa |
dc.identifier.doi | 10.1007/s00170-020-05991-7 | |
dc.subject.keyword | Ball milling | eng |
dc.subject.keyword | Crystallite size | eng |
dc.subject.keyword | Hexane | eng |
dc.subject.keyword | High resolution transmission electron microscopy | eng |
dc.subject.keyword | Milling (machining) | eng |
dc.subject.keyword | Powders | eng |
dc.subject.keyword | Rietveld analysis | eng |
dc.subject.keyword | Scanning electron microscopy | eng |
dc.subject.keyword | X ray diffraction | eng |
dc.subject.keyword | Dislocation densities | eng |
dc.subject.keyword | High-energy ball milling | eng |
dc.subject.keyword | Lattice strain | eng |
dc.subject.keyword | Milling process | eng |
dc.subject.keyword | Milling time | eng |
dc.subject.keyword | N hexane | eng |
dc.subject.keyword | Titanium powders | eng |
dc.subject.keyword | Transformation process | eng |
dc.subject.keyword | Titanium metallography | eng |
dc.publisher.faculty | Facultad de Ingenierías | spa |
dc.affiliation | Restrepo, A.H., Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia, P. O. Box 1226, Calle 62 N° 52 – 59, Medellín, Colombia | |
dc.affiliation | Ríos, J.M., Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia, P. O. Box 1226, Calle 62 N° 52 – 59, Medellín, Colombia | |
dc.affiliation | Arango, F., Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia, P. O. Box 1226, Calle 62 N° 52 – 59, Medellín, Colombia | |
dc.affiliation | Correa, E., Grupo de Investigación Materiales con Impacto – MAT&MPAC, Facultad de Ingenierías, Universidad de Medellín, Carrera 87 No 30 – 65, Medellín, Colombia | |
dc.affiliation | Zuleta, A.A., Grupo de Investigación de Estudios en Diseño - GED, Facultad de Diseño Industrial, Universidad Pontificia Bolivariana, Sede Medellín, Circular 1 No 70 – 01, Medellín, Colombia | |
dc.affiliation | Valencia-Escobar, A., Grupo de Investigación de Estudios en Diseño - GED, Facultad de Diseño Industrial, Universidad Pontificia Bolivariana, Sede Medellín, Circular 1 No 70 – 01, Medellín, Colombia | |
dc.affiliation | Bolivar, F.J., Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia, P. O. Box 1226, Calle 62 N° 52 – 59, Medellín, Colombia | |
dc.affiliation | Castaño, J.G., Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia, P. O. Box 1226, Calle 62 N° 52 – 59, Medellín, Colombia | |
dc.affiliation | Echeverría, F.E., Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Universidad de Antioquia, P. O. Box 1226, Calle 62 N° 52 – 59, Medellín, Colombia | |
dc.relation.references | Fang, Z.Z., Paramore, J.D., Sun, P., Ravi Chandran, K.S., Zhang, Y., Xia, Y., Cao, F., Free, M., Powder metallurgy of titanium–past, present, and future (2018) Int Mater Rev, 63 (7), pp. 407-459 | |
dc.relation.references | Wang, M., Zhou, J., Yin, Y., Nan, H., Xue, P., Tu, Z., Hot deformation behavior of the Ti6Al4V alloy prepared by powder hot isostatic pressing (2017) J Alloys Compd, 721, pp. 320-332 | |
dc.relation.references | Romero, C., Yang, F., Bolzoni, L., Fatigue and fracture properties of Ti alloys from powder-based processes – a review (2018) Int J Fatigue, 117, pp. 407-419 | |
dc.relation.references | Duan, W., Yin, Y., Zhou, J., Wang, M., Nan, H., Zhang, P., Dynamic research on Ti6Al4V powder HIP densification process based on intermittent experiments (2019) J Alloys Compd, 771, pp. 489-497 | |
dc.relation.references | Future prospects for titanium powder metallurgy markets (2015) Titanium Powder Metallurgy, pp. 579-600. , https://doi.org/10.1016/B978-0-12-800054-0.00030-7 | |
dc.relation.references | Duda, T., Raghavan, L.V., 3D metal printing technology (2016) Int Fed Autom Control (IFAC), 49 (29), pp. 103-110. , https://doi.org/10.1016/j.ifacol.2016.11.111 | |
dc.relation.references | Bolzoni, L., (2011) Diseño Y Procesado De Aleaciones De Titanio Mediante Técnicas Pulvimetalúrgicas Avanzadas, , Tesis Doctoral, Universidad Carlos III de Madrid | |
dc.relation.references | Esteban, P.G., Bolzoni, L., Ruiz-Navas, E.M., Gordo, E., Introducción al procesado pulvimetalúrgico del titanio (2011) Rev Metal, 47 (2), pp. 169-187 | |
dc.relation.references | Nouri, A., Sola, A., Metal particle shape: a practical perspective (2018) Met Powder Rep, 73 (5), pp. 276-282 | |
dc.relation.references | Phasha, M., Maweja, K., Babst, C., Mechanical alloying by ball milling of Ti and Mg elemental powders: operation condition considerations (2010) J Alloys Compd, 492 (1-2), pp. 201-207 | |
dc.relation.references | Dabhade, V.V., Rama Mohan, T.R., Ramakrishnan, P., Synthesis of nanosized titanium powder by high energy milling (2001) Appl Surf Sci, 182 (3-4), pp. 390-393 | |
dc.relation.references | Galindez, Y., Correa, E., Zuleta, A.A., Valencia-Escobar, A., Calderon, D., Toro, L., Chacon, P., Echeverría, F., Improved Mg–Al–Zn magnesium alloys produced by high energy milling and hot sintering (2019) Met Mater Int | |
dc.relation.references | Yang, L., (2015) Nanotechnology-enhanced metals and alloys for orthopedic implants, Nanotechnology-Enhanced Orthopedic Materials, , Elsevier Ltd, Amsterdam | |
dc.relation.references | Phasha, M.J., Bolokang, A.S., Ngoepe, P.E., Solid-state transformation in nanocrystalline Ti induced by ball milling (2010) Mater Lett, 64 (10), pp. 1215-1218 | |
dc.relation.references | Dorofeev, G.A., Lubnin, A.N., Lad Yanov, V.I., Mukhgalin, V.V., Puskkarev, B.E., Structural and phase transformations during ball milling of titanium in medium of liquid hydrocarbons (2014) Phys Met Metallogr, 115 (2), pp. 157-168 | |
dc.relation.references | Suryanarayana, C., (2004) Mechanical alloying and milling, , Marcel Dekker, New York | |
dc.relation.references | Suryanarayana, C., Froes, F.H.S., Nanocrystalline titanium-magnesium alloys through mechanical alloying (1990) J Mater Res, 5 (9), pp. 1880-1886 | |
dc.relation.references | Suzuki, T., Nagumo, N., Metastable intermediate phase formation at reaction milling of titanium and n-heptane (1995) Scr Metall Mater, 32 (8), pp. 1215-1220 | |
dc.relation.references | Bolokang, A.S., Motaung, D.E., Arendse, C.J., Muller, T.F.G., Formation of the metastable FCC phase by ball milling and annealing of titanium-stearic acid powder (2015) Adv Powder Technol, 26 (2), pp. 632-639 | |
dc.relation.references | Avar, B., Ozcan, S., Structural evolutions in Ti and TiO2 powders by ball milling and subsequent heat-treatments (2014) Ceram Int, 40 (7), pp. 11123-11130 | |
dc.relation.references | Manna, I., Chattopadhyay, P.P., Nandi, P., Banhart, F., Fecht, H.J., Formation of face-centered-cubic titanium by mechanical attrition (2003) J Appl Phys, 93 (3), pp. 1520-1524 | |
dc.relation.references | Wawner, F.E., Lawless, K.R., Epitaxial growth of titanium thin films (1969) J Vac Sci Technol, 6 (4), pp. 588-590 | |
dc.relation.references | Schneider, C.A., Rasband, W.S., Eliceiri, K.W., NIH Image to ImageJ: 25 years of image analysis (2012) Nat Methods, 9 (7), pp. 671-675 | |
dc.relation.references | Waseda, Y., Matsubara, E., Shinoda, K., (2001) X ray diffraction crystallography, , Springer, Berlin | |
dc.relation.references | Hajalilou, A., Hashim, M., Ebrahimi-Kahizsangi, R., Ismail, I., Sarami, N., Synthesis of titanium carbide and TiC-SiO2 nanocomposite powder using rutile and Si by mechanically activated sintering (2014) Adv Powder Technol, 25 (3), pp. 1094-1102 | |
dc.relation.references | Ali, S., Karunanithi, R., Prashanth, M., Rahman, M.A., X-ray peak broadening on microstructure, and structural properties of titanium and Ti-6Al-4V alloys (2019) Mater Today Proc, 27, pp. 2390-2393 | |
dc.relation.references | Sakher, E., Loudjani, N., Benchiheub, M., Bououdina, M., Influence of milling time on structural and microstructural parameters of Ni50Ti50 prepared by mechanical alloying using rietveld analysis (2018) J Nanomater, 2018, pp. 1-11 | |
dc.relation.references | Singh, P., Abhash, A., Yadav, N., Shafeeq, M., Singh, I.B., Mondal, D.P., Effect of milling time on powder characteristics and mechanical performance of Ti4wt%Al alloy (2018) Powder Technol, 342, pp. 275-287 | |
dc.relation.references | Asano, K., Enoki, H., Akiba, E., Synthesis process of Mg–Ti BCC alloys by means of ball milling (2009) J Alloys Compd, 486 (1-2), pp. 115-123 | |
dc.relation.references | Ghosh, B., Pradhan, S.K., Microstructure characterization of nanocrystalline TiC synthesized by mechanical alloying (2010) Mater Chem Phys, 120 (2-3), pp. 537-545 | |
dc.relation.references | Shial, S.R., Masanta, M., Chaira, D., Recycling of waste Ti machining chips by planetary milling: generation of Ti powder and development of in situ TiC reinforced Ti-TiC composite powder mixture (2018) Powder Technol, 329, pp. 232-240 | |
dc.relation.references | Hosseini-Gourajoubi, F., Pourabdoli, M., Uner, D., Raygan, S., Effect of process control agents on synthesizing nano-structured 2Mg-9Ni-Y catalyst by mechanical milling and its catalytic effect on desorption capacity of MgH2 (2015) Adv Powder Technol, 26, pp. 448-453 | |
dc.relation.references | Ma, Q., Froes, F.H.S., (2015) Titanium Powder Metallurgy, , Elsevier Inc., Amsterdam | |
dc.relation.references | Xu, W., Xiao, S., Lu, X., Chen, G., Liu, C., Qu, X., Fabrication of commercial pure Ti by selective laser melting using hydride-dehydride titanium powders treated by ball milling (2019) J Mater Sci Technol, 35 (2), pp. 322-327 | |
dc.relation.references | Zhou, H., Hu, L., Sun, Y., Zhang, H., Duan, C., Yu, H., Synthesis of nanocrystalline AZ31 magnesium alloy with titanium addition by mechanical milling (2016) Mater Charact, 113, pp. 108-116 | |
dc.relation.references | Kurama, H., Erkuş, Ş., Gaşan, H., The effect of process control agent usage on the structural properties of MgB2 synthesized by high energy ball mill (2017) Ceram Int, 43, pp. S391-S396 | |
dc.relation.references | Zou, C., Long, Y., Zheng, X., Lin, H., Zhang, F., Effect of ball sizes on synthesis of OsB2 powders by mechanical alloying (2017) Ceram Int, 43 (18), pp. 17111-17115 | |
dc.relation.references | Suryanarayana, C., Mechanical alloying and milling (2001) Prog Mater Sci, 46 (1-2), pp. 1-184 | |
dc.relation.references | Keskinen, J., Pogany, A., Rubin, J., Ruuskanen, P., Carbide and hydride formation during mechanical alloying of titanium and aluminium with hexane (1995) Mater Sci Eng A, 196, pp. 205-211 | |
dc.relation.references | Lohse, B.H., Calka, A., Wexler, D., Raman spectroscopy as a tool to study TiC formation during controlled ball milling (2005) J Appl Phys, 97 (11), pp. 1-7 | |
dc.relation.references | Delogu, F., Takacs, L., Mechanochemistry of Ti-C powder mixtures (2014) Acta Mater, 80, pp. 435-444 | |
dc.relation.references | Chen, C., Qian, S., Wang, S., Niu, L., Liu, R., Liao, B., Zhong, Z., Wu, Y., The microstructure and formation mechanism of face-centered cubic Ti in commercial pure Ti foils during tensile deformation at room temperature (2018) Mater Charact, 136, pp. 257-263 | |
dc.relation.references | Edalati, K., Emami, H., Staykov, A., Smith, D.J., Akiba, E., Horita, Z., Formation of metastable phases in magnesium–titanium system by high-pressure torsion and their hydrogen storage performance (2015) Acta Mater, 99, pp. 150-156 | |
dc.relation.references | Zhang, D.L., Ying, D.Y., Formation of fcc titanium during heating high energy ball milled Al-Ti powders (2002) Mater Lett, 52 (4-5), pp. 329-333 | |
dc.relation.references | Han, G., Lu, X., Xia, Q., Lei, B., Yan, Y., Shang, C.J., Face-centered-cubic titanium - a new crystal structure of Ti in a Ti-8Mo-6Fe alloy (2018) J Alloys Compd, 748, pp. 943-952 | |
dc.relation.references | Lu, C.J., Zhang, J., Li, Z.Q., Structural evolution of titanium powder during ball milling in different atmospheres (2004) J Alloys Compd, 381 (1-2), pp. 278-283 | |
dc.relation.references | Chatterjee, P., Sen Gupta, S.P., An X-ray diffraction study of nanocrystalline titanium prepared by high-energy vibrational ball milling (2001) Appl Surf Sci, 182 (3-4), pp. 372-376 | |
dc.relation.references | Chatterjee, P., Sen Gupta, S.P., An X-ray diffraction study of strain localization and anisotropic dislocation contrast in nanocrystalline titanium (2001) Philos Mag A, 81 (1), pp. 49-60 | |
dc.type.version | info:eu-repo/semantics/publishedVersion | |
dc.type.driver | info:eu-repo/semantics/article | |