Mostrar el registro sencillo del ítem
Effect of Heat Treatment on Tribological Properties of Ni-B Coatings on Low Carbon Steel: Wear Maps and Wear Mechanisms
dc.creator | Arias S. | |
dc.creator | Castaño J.G. | |
dc.creator | Correa E. | |
dc.creator | Echeverría F. | |
dc.creator | Gómez M. | |
dc.date | 2019 | |
dc.date.accessioned | 2021-02-05T14:59:05Z | |
dc.date.available | 2021-02-05T14:59:05Z | |
dc.identifier.issn | 7424787 | |
dc.identifier.uri | http://hdl.handle.net/11407/6068 | |
dc.description | Among the alternatives for using low-carbon steel in parts with heavy wear, as gears and bearing surfaces, Ni-B electroless coatings deposited on these steels are considered due to their wear resistance. Wear maps, elaborated from friction or wear results found for different evaluated conditions, are a very useful tool for the selection of materials based on tribological properties. However, wear maps for electroless Ni-B coatings are very scarce. In this work, dry sliding wear tests with different loads and sliding velocities were performed on Ni-B electroless coatings applied on AISI/SAE 1018 steel, with and without heat treatment at 450 °C for 1 h, with the aim of determining the effect of the heat treatment on the friction coefficients and wear rates. Contour and profile maps, and finally friction and wear maps, were constructed for each of the coatings evaluated. The coating properties before and after the heat treatment were studied by means of scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), scratch tests, nanoindentation, and differential scanning calorimetry (DSC). Sliding wear tracks were studied using SEM, energy-dispersive spectroscopy (EDS), and micro-Raman spectroscopy. Good agreement between experimental and predicted values was found in friction and wear maps. Wear mechanisms change from flattening in less severe conditions to abrasion in more severe conditions, besides spalling and adhesive wear in untreated coatings. Moreover, abrasive wear is lower in heat-treated coating than in untreated coating. © 2019 by ASME. | |
dc.language.iso | eng | |
dc.publisher | American Society of Mechanical Engineers (ASME) | |
dc.relation.isversionof | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85067441681&doi=10.1115%2f1.4043906&partnerID=40&md5=a8f0bbc7ac49172303519ae5d45b8482 | |
dc.source | Journal of Tribology | |
dc.title | Effect of Heat Treatment on Tribological Properties of Ni-B Coatings on Low Carbon Steel: Wear Maps and Wear Mechanisms | |
dc.type | Article | eng |
dc.rights.accessrights | info:eu-repo/semantics/restrictedAccess | |
dc.publisher.program | Ingeniería de Materiales | spa |
dc.identifier.doi | 10.1115/1.4043906 | |
dc.subject.keyword | Abrasion | eng |
dc.subject.keyword | Adhesives | eng |
dc.subject.keyword | Atomic force microscopy | eng |
dc.subject.keyword | Coatings | eng |
dc.subject.keyword | Differential scanning calorimetry | eng |
dc.subject.keyword | Energy dispersive spectroscopy | eng |
dc.subject.keyword | Friction | eng |
dc.subject.keyword | Heat treatment | eng |
dc.subject.keyword | Nickel steel | eng |
dc.subject.keyword | Scanning electron microscopy | eng |
dc.subject.keyword | Tribology | eng |
dc.subject.keyword | Wear resistance | eng |
dc.subject.keyword | Dry sliding wear test | eng |
dc.subject.keyword | Effect of heat treatments | eng |
dc.subject.keyword | Energy dispersive spectroscopies (EDS) | eng |
dc.subject.keyword | Friction coefficients | eng |
dc.subject.keyword | Heat-treated coatings | eng |
dc.subject.keyword | Micro Raman Spectroscopy | eng |
dc.subject.keyword | Selection of materials | eng |
dc.subject.keyword | Tribological properties | eng |
dc.subject.keyword | Low carbon steel | eng |
dc.relation.citationvolume | 141 | |
dc.relation.citationissue | 9 | |
dc.publisher.faculty | Facultad de Ingenierías | spa |
dc.affiliation | Arias, S., Centro de Investigación Innovación y Desarrollo de Materiales - CIDEMAT, Universidad de Antioquia UdeA, Calle 70 NO 52 - 21, Medellín, Antioquia, 050010, Colombia | |
dc.affiliation | Castaño, J.G., Centro de Investigación Innovación y Desarrollo de Materiales - CIDEMAT, Universidad de Antioquia UdeA, Calle 70 NO 52 - 21, Medellín, Antioquia, 050010, Colombia | |
dc.affiliation | Correa, E., Grupo de Investigación Materiales Con Impacto -MATandMPAC, Facultad de Ingenierías, Universidad de Medellin, Carrera 87 NO 30 - 65, Medellín, Antioquia, 050026, Colombia | |
dc.affiliation | Echeverría, F., Centro de Investigación Innovación y Desarrollo de Materiales - CIDEMAT, Universidad de Antioquia UdeA, Calle 70 NO 52 - 21, Medellín, Antioquia, 050010, Colombia | |
dc.affiliation | Gómez, M., Centro de Investigación Innovación y Desarrollo de Materiales - CIDEMAT, Universidad de Antioquia UdeA, Calle 70 NO 52 - 21, Medellín, Antioquia, 050010, Colombia | |
dc.relation.references | American Society of Materials, 2013, ASM Handbook 4A: Steel Heat Treating Fundamentals and Processes, ASM International, Materials Park, OH | |
dc.relation.references | Dominguez-Ríos, C., Hurtado-Macias, A., Torres-Sanchez, R., Ramos, M.A., Gonzalez-Hernandez, J., Measurement of mechanical properties of an electroless ni-b coating using nanoindentation (2012) Ind. Eng. Chem. Res., 51 (22), pp. 7762-7768 | |
dc.relation.references | Mukhopadhyaya, A., Kumar Barman, T., Sahoo, P., Effect of heat treatment on the characteristics of electroless ni-b, ni-b-w and ni-b-mo coatings (2018) Mater. Today Proc., 5 (2), pp. 3306-3315 | |
dc.relation.references | Taheri, R., Oguocha, I.N.A., Yannacopoulos, S., The tribological characteristics of electroless ni-p coatings (2001) Wear, 249 (5-6), pp. 389-396 | |
dc.relation.references | Wang, C., Farhat, Z., Jarjoura, G., Hassan, M.K., Abdullah, A.M., Indentation and erosion behavior of electroless ni-p coating on pipeline steel (2017) Wear, 376-377, pp. 1630-1639 | |
dc.relation.references | Krishnaveni, K., Narayanan, S.T.S.N., Seshadri, S.K., Electroless ni-b coatings: Preparation and evaluation of hardness and wear resistance (2005) Surf. Coat. Technol., 190 (1), pp. 115-121 | |
dc.relation.references | Vitry, V., Kanta, A.-F., Dille, J., Delaunois, F., Structural State of Electroless Nickel-Boron Deposits (5wt.% B): Characterization by XRD and TEM (2012) Surf. Coat. Technol., 206 (16), pp. 3444-3449 | |
dc.relation.references | Baskaran, I., Kumar, R.S., Narayanan, T.S.N.S., Stephen, A., Formation of electroless ni-b coatings using low temperature bath and evaluation of their characteristic properties (2006) Surf. Coat. Technol., 200 (24), pp. 6888-6894 | |
dc.relation.references | SankaraNarayanan, T.S.N., Krishnaveni, K., Seshadri, S.K., Electroless ni-p/ni-b duplex coatings: Preparation and evaluation of microhardness, wear and corrosion resistance (2003) Mater. Chem. Phys., 82 (3), pp. 771-779 | |
dc.relation.references | Niksefat, V., Ghorbani, M., Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of ni-b-tio2 composite coatings (2015) J. Alloys Compd., 633, pp. 127-136 | |
dc.relation.references | Sahoo, P., Kalyan Das, S., Tribology of electroless nickel coatings- A review (2011) Mater. Des., 32 (4), pp. 1760-1775 | |
dc.relation.references | Bhushan, B., (2013) Introduction to Tribology, , 2nd ed., John Wiley and Sons, Chichester, UK | |
dc.relation.references | Mukhopadhyay, A., Kumar Barman, T., Sahoo, P., Friction and wear performance of electroless ni-b coatings at different operating temperatures (2019) Silicon, 11 (2), pp. 721-731 | |
dc.relation.references | Hsu, S.M., Shen, M.C., Wear maps (2001) Modern Tribology Handbook, pp. 317-354. , B. Bhushan, ed., CRC Press, Boca Raton, FL | |
dc.relation.references | Stachowiak, A., Tyczewski, P., Zwierzycki, W., The application of wear maps for analyzing the results of research into tribocorrosion (2016) Wear, 352, pp. 146-154 | |
dc.relation.references | Rasool, G., Stack, M.M., Mapping the role of cr content in dry sliding of steels: Comparison between maps for material and counterface (2014) Tribol. Int., 80, pp. 49-57 | |
dc.relation.references | Omidi, M., Khodabandeh, A., Nategh, S., Khakbiz, M., Wear mechanisms maps of cnt reinforced al6061 nanocomposites treated by cryomilling and mechanical milling (2017) Tribol. Int., 110, pp. 151-160 | |
dc.relation.references | Vashishtha, N., Sapate, S.G., Abrasive wear maps for high velocity oxy fuel (hvof) sprayed wc-12co and cr3c2-25nicr coatings (2017) Tribol. Int., 114, pp. 290-305 | |
dc.relation.references | Rasool, G., Stack, M.M., Wear maps for tic composite based coatings deposited on 303 stainless steel (2014) Tribol. Int., 74, pp. 93-102 | |
dc.relation.references | Correa, E., Mejía, J.F., Castaño, J.G., Echeverría, F., Gómez, M.A., Tribological characterization of electroless ni-b coatings formed on commercial purity magnesium (2017) ASME J. Tribol., 139 (5), p. 051302 | |
dc.relation.references | (2017) Standard Test Method for Wear Testing with A Pin-on-Disk Apparatus, , ASTM, ASTM International, West Conshohocken, PA, Standard No. G99-17 | |
dc.relation.references | Oraon, B., Majumdar, G., Ghosh, B., Improving hardness of electroless ni-b coatings using optimized deposition conditions and annealing (2008) Mater. Des., 29 (7), pp. 1412-1418 | |
dc.relation.references | Vitry, V., (2009) Electroless Nickel-Boron Deposits: Synthesis, Formation and Characterization | |
dc.relation.references | Effect of Heat Treatments | |
dc.relation.references | Analytical Modeling of the Structural State, , PhD Thesis, Université de Mons, Belgium | |
dc.relation.references | Delaunois, F., Lienard, P., Heat treatments for electrolessnickel-boron plating on aluminium alloys (2002) Surf. Coat. Technol., 160 (2-3), pp. 239-248 | |
dc.relation.references | Mallory, G.O., Hajdu, J.B., (1990) Electroless Plating: Fundamentals and Applications, , Noyes Publ., New York | |
dc.relation.references | Mutkule, S.U., Navale, S.T., Jadhav, V.V., Ambade, S.B., Naushad, M., Sagar, A.D., Patil, V.B., Mane, R.S., Solution-processed nickel oxide films and their liquefied petroleum gas sensing activity (2017) J. Alloys Compd., 695, pp. 2008-2015 | |
dc.relation.references | Liu, B., Wang, B., Gu, J., Effect of ammonia addition on microstructure and wear performance of carbonitrided high carbon bearing steel aisi 52100 (2019) Surf. Coat. Technol., 361, pp. 112-118 | |
dc.relation.references | Heibel, S., Dettinger, T., Nester, W., Clausmeyer, T., Erman Tekkaya, A., Damage mechanisms and mechanical properties of high-strength multiphase steels (2018) Materials (Basel), 11 (5), pp. 761-795 | |
dc.relation.references | Chen, Z., Gandhi, U., Lee, J., Wagoner, R.H., Variation and consistency of young's modulus in steel (2016) J. Mater. Process. Technol., 227, pp. 227-243 | |
dc.relation.references | Kanta, A.-F., Vitry, V., Delaunois, F., Wear and corrosion resistance behaviours of autocatalytic electroless plating (2009) J. Alloys Compd., 486 (1-2), pp. L21-L23 | |
dc.type.version | info:eu-repo/semantics/publishedVersion | |
dc.type.driver | info:eu-repo/semantics/article |
Ficheros en el ítem
Ficheros | Tamaño | Formato | Ver |
---|---|---|---|
No hay ficheros asociados a este ítem. |
Este ítem aparece en la(s) siguiente(s) colección(ones)
-
Indexados Scopus [1632]