Mostrar el registro sencillo del ítem
Effect of pH on Dimethylamine Borane Reduced Electroless Nickel Deposits on AISI/SAE 1045 Steel Surface
dc.creator | Guerra L. | |
dc.creator | Echeverría F. | |
dc.creator | Correa E. | |
dc.date | 2019 | |
dc.date.accessioned | 2020-04-29T14:54:04Z | |
dc.date.available | 2020-04-29T14:54:04Z | |
dc.identifier.issn | 15989623 | |
dc.identifier.uri | http://hdl.handle.net/11407/5799 | |
dc.description | Abstract: Electroless Ni B coatings using DMAB-reduced plating baths at different pH conditions were formed on AISI/SAE 1045 carbon steel. Substrates were grit-blasted with alumina, generating a rough surface suitable for anchorage and nucleation of the coating. The surface of the substrates were examined at selected times of electroless treatment using scanning electron microscopy. The structure of the coating was studied by means of X-ray diffraction. A low-cost boron determination procedure was implemented in order to determine the amount of boron incorporated into the electroless coatings. Coatings nucleate faster at acid and neutral pH conditions; however, at the end of the plating process all coatings were adherent, with the typical morphology of Ni B electroless coatings. Substrates slightly corroded inside the plating bath at acid pH condition. The amount of boron into the coatings was approximately 2.15, 2.14 and 1.10% (wt%) for the acid, neutral and alkaline pH plating baths, respectively. Graphic Abstract: [Figure not available: see fulltext.]. © 2019, The Korean Institute of Metals and Materials. | |
dc.language.iso | eng | |
dc.publisher | Korean Institute of Metals and Materials | |
dc.relation.isversionof | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85069172242&doi=10.1007%2fs12540-019-00362-8&partnerID=40&md5=dab187171f9943b250915f16336ebd5e | |
dc.source | Metals and Materials International | |
dc.subject | Contact plating | |
dc.subject | DMAB | |
dc.subject | Electroless | |
dc.subject | Ferrous alloys | |
dc.subject | Ni B coatings | |
dc.title | Effect of pH on Dimethylamine Borane Reduced Electroless Nickel Deposits on AISI/SAE 1045 Steel Surface | |
dc.type | Article | eng |
dc.rights.accessrights | info:eu-repo/semantics/restrictedAccess | |
dc.publisher.program | Ingeniería de Materiales | |
dc.identifier.doi | 10.1007/s12540-019-00362-8 | |
dc.publisher.faculty | Facultad de Ingenierías | |
dc.affiliation | Guerra, L., Centro de Investigación, Innovación y Desarrollo de Materiales CIDEMAT, Facultad de Ingeniería, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia; Echeverría, F., Centro de Investigación, Innovación y Desarrollo de Materiales CIDEMAT, Facultad de Ingeniería, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia; Correa, E., Grupo de Investigación Materiales con Impacto MAT&MPAC, Facultad de Ingenierías, Universidad de Medellín, Carrera 87 No 30 65, Medellín, Colombia | |
dc.relation.references | Vitry, V., Bonin, L., Effect of temperature on ultrasound-assisted electroless nickel-boron plating (2019) Ultrason. Sonochem., 56, pp. 327-336 | |
dc.relation.references | Huang, Z., Nguyen, T.T., Zhou, Y., Qi, G., A low temperature electroless nickel plating chemistry (2019) Surf. Coat. Technol., 372, pp. 160-165 | |
dc.relation.references | Ta?ci, S., Özden, R.C., Anik, M., Corrosion and wear characteristics of electroless Ni P, Ni P W and composite Ni P W/Al2O3 coatings on AZ91 sheet (2019) Met. Mater. Int., 25, pp. 313-323 | |
dc.relation.references | Thakur, A., Gharde, S., Kandasubramanian, B., Electroless nickel fabrication on surface modified magnesium substrates (2019) Def. Technol., 1, p. 11 | |
dc.relation.references | Qian, W., Wei, H., Chen, H., The effect of heat treatment on Ni B Ce electroless coatings (2019) Surf. Eng., 35, pp. 144-152 | |
dc.relation.references | Mukhopadhyay, A., Barman, T.K., Sahoo, P., Tribological behavior of sodium borohydride reduced electroless nickel alloy coatings at room and elevated temperatures (2017) Surf. Coat. Technol., 321, pp. 464-476 | |
dc.relation.references | Mukhopadhyay, A., Barman, T.K., Sahoo, P., Tribological characteristics of electroless Ni B Mo coatings at different operating temperatures (2019) Surf. Rev. Lett., 26, p. 1850175 | |
dc.relation.references | Mukhopadhyay, A., Barman, T.K., Sahoo, P., Friction and wear performance of electroless Ni B coatings at different operating temperatures (2019) Silicon, 11, pp. 721-731 | |
dc.relation.references | Chiba, A., Haijima, H., Wu, W., Effect of sonication on the electroless Ni B deposited powder from acid bath (2004) Ultrasonics, 42, pp. 617-620 | |
dc.relation.references | Dabalà, M., Brunelli, K., Frattini, R., Magrini, M., Surface hardening of Ti 6Al 4V alloy by diffusion treatment of electroless Ni B coatings (2004) Surf. Eng., 20, pp. 103-107 | |
dc.relation.references | Rha, S.-K., Baek, S.-D., Lee, Y.-S., Effects of dimethylamine borane in electroless Ni B plating (2015) J. Nanosci. Nanotechnol., 15, pp. 7444-7450 | |
dc.relation.references | Hamid, Z.A., Hassan, H.B., Attyia, A.M., Influence of deposition temperature and heat treatment on the performance of electroless Ni B films (2010) Surf. Coat. Technol., 205, pp. 2348-2354 | |
dc.relation.references | Domínguez-Ríos, C., Hurtado-Macias, A., Torres-Sánchez, R., Measurement of mechanical properties of an electroless Ni B coating using nanoindentation (2012) Ind. Eng. Chem. Res., 51, pp. 7762-7768 | |
dc.relation.references | Baskaran, I., Sankara Narayanan, T.S.N., Stephen, A., Corrosion resistance of electroless Ni low B coatings (2009) Trans. IMF, 87, pp. 221-224 | |
dc.relation.references | Anik, M., Körpe, E., ?en, E., Effect of coating bath composition on the properties of electroless nickel boron films (2008) Surf. Coat. Technol., 202, pp. 1718-1727 | |
dc.relation.references | Das, S.K., Sahoo, P., Influence of process parameters on microhardness of electroless Ni B coatings (2012) Adv. Mech. Eng., 4, p. 703168 | |
dc.relation.references | Wang, Z.C., Jia, F., Yu, L., Direct electroless nickel boron plating on AZ91D magnesium alloy (2012) Surf. Coat. Technol., 206, pp. 3676-3685 | |
dc.relation.references | Cai, Y., Chang, Z.Z., Chen, C.M., Complexing agent on the surface of magnesium alloy plating of Ni B alloy (2011) Adv. Mater. Res., 311-313, pp. 327-330 | |
dc.relation.references | Chang, Q.H., Chang, Z.Z., Bai, Y.T., The effect of NaOH on the surface of magnesium alloy Ni B alloy plating properties (2011) Adv. Mater. Res., 189-193, pp. 347-350 | |
dc.relation.references | Vitry, V., Kanta, A.-F., Delaunois, F., Application of nitriding to electroless nickel boron coatings: chemical and structural effects | |
dc.relation.references | mechanical characterization | |
dc.relation.references | corrosion resistance (2012) Mater. Des., 39, pp. 269-278 | |
dc.relation.references | Vitry, V., Sens, A., Kanta, A.-F., Delaunois, F., Experimental study on the formation and growth of electroless nickel boron coatings from borohydride-reduced bath on mild steel (2012) Appl. Surf. Sci., 263, pp. 640-647 | |
dc.relation.references | Vitry, V., Sens, A., Kanta, A.-F., Delaunois, F., Wear and corrosion resistance of heat treated and as-plated duplex NiP/NiB coatings on 2024 aluminum alloys (2012) Surf. Coat. Technol., 206, pp. 3421-3427 | |
dc.relation.references | Brunelli, K., Dabalà, M., Dughiero, F., Magrini, M., Diffusion treatment of Ni B coatings by induction heating to harden the surface of Ti 6Al 4V alloy (2009) Mater. Chem. Phys., 115, pp. 467-472 | |
dc.relation.references | Gilley, K.L., Nino, J.C., Riddle, Y.W., Heat treatments modify the tribological properties of nickel boron coatings (2012) ACS Appl. Mater. Interfaces, 4, pp. 3069-3076 | |
dc.relation.references | Srinivasan, K.N., Meenakshi, R., Santhi, A., Studies on development of electroless Ni B bath for corrosion resistance and wear resistance applications (2010) Surf. Eng., 26, pp. 153-158 | |
dc.relation.references | Vitry, V., Kanta, A.-F., Delaunois, F., Evolution of reactive concentration during borohydride-reduced electroless nickel boron plating and design of a replenishment procedure (2012) Ind. Eng. Chem. Res., 51, pp. 9227-9234 | |
dc.relation.references | (2011) Standard Terminology Relating to Electroplating, , ASTM B374-06, West Conshohocken | |
dc.relation.references | Wang, H.-Y., Chung, S.-T., Chuang, Y.-C., Tsai, W.-T., Electroless Ni B deposition from an emulsified supercritical carbon dioxide bath (2010) Thin Solid Films, 518, pp. 7505-7508 | |
dc.relation.references | Blumenthal, H., Fall, W., Potentiometric determination of boron in nickel boride (1953) Anal. Chem., 25, pp. 1120-1122 | |
dc.relation.references | (2016) Standard guide for determining mass per unit area of electrodeposited and related coatings by gravimetric and other chemical analysis procedures, , ASTM B767-88, West Conshohocken | |
dc.relation.references | Vitry, V., Kanta, A.-F., Delaunois, F., Initiation and formation of electroless nickel boron coatings on mild steel: effect of substrate roughness (2010) Mater. Sci. Eng. B, 175, pp. 266-273 | |
dc.relation.references | Bagheri, S., Guagliano, M., Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys (2009) Surf. Eng., 25, pp. 3-14 | |
dc.relation.references | Lee, S.B., Kim, Y.-M., Signature of surface energy dependence of partial dislocation slip in a gold nanometer-sized protrusion (2011) Scr. Mater., 64, pp. 1125-1128 | |
dc.relation.references | Pourbaix, M., (1974) Atlas of Electrochemical Equilibria in Aqueous Solutions, , National Association of Corrosion Engineers, Houston | |
dc.relation.references | (2015) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use, , ASTM, West Conshohocken | |
dc.relation.references | Khalili, K., Safaei, M., FEM analysis of edge preparation for chamfered tools (2009) Int. J. Mater. Form., 2, pp. 217-224 | |
dc.relation.references | Yamamoto, T., Nagayama, T., Nakamura, T., Thermal Expansion and Thermal Stress Behavior of Electroless-Plated Fe Ni B Alloy Thin Film for High-Density Packaging (2019) J. Electrochem. Soc., 166, pp. D3238-D3245 | |
dc.relation.references | Agarwala, R.C., Agarwala, V., Electroless alloy/composite coatings: a review (2003) Sadhana, 28, pp. 475-493 | |
dc.relation.references | Beygi, H., Vafaeenezhad, H., Sajjadi, S.A., Modeling the electroless nickel deposition on aluminum nanoparticles (2012) Appl. Surf. Sci., 258, pp. 7744-7750 | |
dc.relation.references | Yoon, J.-W., Koo, J.-M., Kim, J.-W., Effect of boron content in electroless Ni B layer on plating layer properties and soldering characteristics with Sn Ag solder (2008) J. Alloys Compd., 466, pp. 73-79 | |
dc.relation.references | Krishnaveni, K., Sankara Narayanan, T.S.N., Seshadri, S.K., Electroless Ni B coatings: preparation and evaluation of hardness and wear resistance (2005) Surf. Coat. Technol., 190, pp. 115-121 | |
dc.relation.references | Narayanan, T.S.N.S., Krishnaveni, K., Seshadri, S.K., Electroless Ni P/Ni B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance (2003) Mater. Chem. Phys., 82, pp. 771-779 | |
dc.relation.references | Gaevskaya, T.V., Novotortseva, I.G., Tsybulskaya, L.S., The effect of boron on the microstructure and properties of electrodeposited nickel films (1996) Met. Finish., 94, pp. 100-103 | |
dc.relation.references | Zheng, L., Peng, X., Temperature-dependent thermal and chemical stabilities as well as mechanical properties of electrodeposited nanocrystalline Ni (2018) Met. Mater. Int., 24, pp. 1293-1302 | |
dc.relation.references | Liu, S., Zhou, W., Yu, T., Preparation of layered nanoporous Ti/TiO2/Ni W B electrode for electrocatalytic reduction of coal (2014) Fuel, 134, pp. 151-158 | |
dc.relation.references | Salicio-Paz, A., Grande, H., Pellicer, E., Monolayered versus multilayered electroless NiP coatings: impact of the plating approach on the microstructure, mechanical and corrosion properties of the coatings (2019) Surf. Coat. Technol., 368, pp. 138-146 | |
dc.relation.references | Choi, J.W., Hwang, G.H., Han, W.K., Kang, S.G., Phase transformation of Ni B, Ni P diffusion barrier deposited electrolessly on Cu interconnect (2006) Appl. Surf. Sci., 253, pp. 2171-2178 | |
dc.relation.references | Owen, B.B., The dissociation constant of boric acid from 10 to 50° (1934) J. Am. Chem. Soc., 56, pp. 1695-1697 | |
dc.relation.references | Azevedo, M.C.C., Cavaleiro, A.M.V., The acid base titration of a very weak acid: boric acid (2012) J. Chem. Educ., 89, pp. 767-770 | |
dc.relation.references | Knoeck, J., Taylor, J.K., Aqueous boric acid-borate-mannitol equilibriums (1969) Anal. Chem., 41, pp. 1730-1734 | |
dc.relation.references | Hollander, M., Rieman, W., III, Titration of boric acid in presence of mannitol (1945) Ind. Eng. Chem. Anal. Ed., 17, pp. 602-603 | |
dc.relation.references | Balintova, M., Petrilakova, A., Study of pH influence on the selective precipitation of heavy metals from acid mine drainage (2011) Chem. Eng. Trans., 25, pp. 345-350 | |
dc.type.version | info:eu-repo/semantics/publishedVersion | |
dc.type.driver | info:eu-repo/semantics/article |
Ficheros en el ítem
Ficheros | Tamaño | Formato | Ver |
---|---|---|---|
No hay ficheros asociados a este ítem. |
Este ítem aparece en la(s) siguiente(s) colección(ones)
-
Indexados Scopus [1632]