Mostrar el registro sencillo del ítem

Experimental study of the tensile strength of hot asphalt mixtures measured with indirect tensile and semi-circular bending tests

dc.contributor.authorMarín-Uribe C.R
dc.contributor.authorRestrepo-Tamayo L.M.
dc.date.accessioned2022-09-14T14:33:44Z
dc.date.available2022-09-14T14:33:44Z
dc.date.created2022
dc.identifier.issn9500618
dc.identifier.urihttp://hdl.handle.net/11407/7457
dc.descriptionThis paper examines the tensile strength performance of hot mix asphalt without and with reclaimed asphalt pavement (RAP), different gradations, asphalt content, and test temperatures applying the Indirect Tensile Test (IDT) and the Semi-Circular Bending Test (SCB). Laboratory test results indicated the dependence of the tensile strength on the study variables, with evident trends for the type of test and the test temperature. A reasonable correlation between IDT and SCB tensile strength was verified. There is also a good correlation between IDT and SCB when data reported in previous research is incorporated. © 2022 Elsevier Ltdeng
dc.language.isoeng
dc.publisherElsevier Ltd
dc.relation.isversionofhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85129555999&doi=10.1016%2fj.conbuildmat.2022.127651&partnerID=40&md5=f395c3f3abccd44bb752d0fb337fdffb
dc.sourceConstruction and Building Materials
dc.titleExperimental study of the tensile strength of hot asphalt mixtures measured with indirect tensile and semi-circular bending tests
dc.typeArticle
dc.rights.accessrightsinfo:eu-repo/semantics/restrictedAccess
dc.publisher.programIngeniería de Sistemas
dc.type.spaArtículo
dc.identifier.doi10.1016/j.conbuildmat.2022.127651
dc.subject.keywordHot mix asphalteng
dc.subject.keywordIDTeng
dc.subject.keywordIndirect Tensile Testeng
dc.subject.keywordRAPeng
dc.subject.keywordReclaimed asphalt pavementeng
dc.subject.keywordSCBeng
dc.subject.keywordSemi-Circular Bending Testeng
dc.subject.keywordTensile strengtheng
dc.subject.keywordAsphalt mixtureseng
dc.subject.keywordAsphalt pavementseng
dc.subject.keywordBending strengtheng
dc.subject.keywordBending testseng
dc.subject.keywordTensile testingeng
dc.subject.keywordHot mix asphalteng
dc.subject.keywordIndirect tensileeng
dc.subject.keywordIndirect tensile testeng
dc.subject.keywordReclaimed asphalt pavementseng
dc.subject.keywordSemi-circular bending testeng
dc.subject.keywordStrength performanceeng
dc.subject.keywordTest temperatureseng
dc.subject.keywordTensile strengtheng
dc.relation.citationvolume339
dc.publisher.facultyFacultad de Ingenierías
dc.affiliationMarín-Uribe, C.R., School of Civil Construction, Faculty of Engineering, Pontificia Universidad Católica de Chile, Chile
dc.affiliationRestrepo-Tamayo, L.M., Faculty of Engineering, Universidad de Medellín, Colombia
dc.relation.referencesXu, G., Wang, H., Diffusion and interaction mechanism of rejuvenating agent with virgin and recycled asphalt binder: a molecular dynamics study (2018) Mol. Simul., 44, pp. 1433-1443
dc.relation.referencesGuo, P., Cao, Z., Chen, S., Chen, C., Liu, J., Meng, J., Application of design-expert response surface methodology for the optimization of recycled asphalt mixture with waste engine oil (2021) J. Mater. Civ. Eng., 33, p. 04021075
dc.relation.referencesZou, G., Zhang, J., Li, Y., Lin, Z., Quantitative characterize binder blending and diffusion in recycled asphalt mixture: An environmental-friendly solution using wooden cube and 3D fluorescence image technology (2021) J. Clean. Prod., 293
dc.relation.referencesSaliani, S.S., Carter, A., Baaj, H., Tavassoti, P., Characterization of asphalt mixtures produced with coarse and fine recycled asphalt particles (2019) Infrastructures., 4
dc.relation.referencesDony, A., Colin, J., Bruneau, D., Drouadaine, I., Navaro, J., Reclaimed asphalt concretes with high recycling rates: changes in reclaimed binder properties according to rejuvenating agent (2013) Constr. Build. Mater., 41, pp. 175-181
dc.relation.referencesZhang, J., Zhang, X., Liang, M., Jiang, H., Wei, J., Yao, Z., Influence of different rejuvenating agents on rheological behavior and dynamic response of recycled asphalt mixtures incorporating 60% RAP dosage (2020) Constr. Build. Mater., 238
dc.relation.referencesZhu, J., Ma, T., Fan, J., Fang, Z., Chen, T., Zhou, Y., Experimental study of high modulus asphalt mixture containing reclaimed asphalt pavement (2020) J. Clean. Prod., 263
dc.relation.referencesZhu, J., Ma, T., Cheng, H., Li, T., Fu, J., Mechanical properties of high-modulus asphalt concrete containing recycled asphalt pavement: a parametric study (2021) J. Mater. Civ. Eng., 33, p. 04021056
dc.relation.referencesAli, A.W., Mehta, Y.A., Nolan, A., Purdy, C., Bennert, T., Investigation of the impacts of aging and RAP percentages on effectiveness of asphalt binder rejuvenators (2016) Constr. Build. Mater., 110, pp. 211-217
dc.relation.referencesBouraima, M.B., Qiu, Y., Investigation of influential factors on the tensile strength of cold recycled mixture with bitumen emulsion due to moisture conditioning (2017) J. Traffic Transp. Eng., 4, pp. 198-205
dc.relation.referencesPiuzzi, G.P., Scheuermann Filho, H.C., Villena Del Carpio, J.A., Consoli, N.C., The effects of porosity, asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends (2021) Geotext. Geomembranes., 49, pp. 864-870
dc.relation.referencesBennert, T., Haas, E., Wass, E., Indirect tensile test (IDT) to determine asphalt mixture performance indicators during quality control testing in New Jersey (2018) Transp. Res. Rec., 2672, pp. 394-403
dc.relation.referencesArabani, M., Ferdowsi, B., Evaluating the semi-circular bending test for hma mixtures (2009) Int. J. Eng. Trans. A: Basics., 22, pp. 47-58
dc.relation.referencesKaseer, F., Yin, F., Arámbula-Mercado, E., Epps Martin, A., Daniel, J.S., Salari, S., Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test (2018) Constr. Build. Mater., 167, pp. 286-298
dc.relation.referencesZhang, J., Little, D.N., Grajales, J., You, T., Kim, Y.R., Use of semicircular bending test and cohesive zone modeling to evaluate fracture resistance of stabilized soils (2017) Transp. Res. Rec., 2657, pp. 67-77
dc.relation.referencesKim, Y.R., Wen, H., Fracture energy from indirect tension testing (2002) Asph. Paving Technol. Assoc. Asph. Paving Technol. Tech. Sess., 71, pp. 779-793
dc.relation.referencesLancaster, I.M., Khalid, H.A., Kougioumtzoglou, I.A., Extended FEM modelling of crack propagation using the semi-circular bending test (2013) Constr. Build. Mater., 48, pp. 270-277
dc.relation.referencesChen, X., Solaimanian, M., Effect of test temperature and displacement rate on semicircular bend test (2019) J. Mater. Civ. Eng., 31, pp. 1-9
dc.relation.referencesWang, X., Zhang, J., Li, K., Ding, Y., Geng, L., Cracking analysis of asphalt mixture using semi-circle bending method (2021) Iran. J. Sci. Technol. - Trans Civ. Eng., 45, pp. 269-279
dc.relation.referencesDu, H., Ni, F., Ma, X., Crack resistance evaluation for in-service asphalt pavements by using SCB tests of layer-core samples (2021) J. Mater. Civ. Eng., 33, pp. 1-11
dc.relation.referencesFalchetto, A.C., Moon, K.H., Wang, D., Riccardi, C., Wistuba, M.P., Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations (2018) Road Mater. Pavement Des., 19, pp. 591-604
dc.relation.referencesNsengiyumva, G., Kim, Y.R., Effect of testing configuration in semi-circular bending fracture of asphalt mixtures: experiments and statistical analyses (2019) Transp. Res. Rec., 2673, pp. 320-328
dc.relation.referencesSaha, G., Biligiri, K.P., Fracture damage evaluation of asphalt mixtures using Semi-Circular Bending test based on fracture energy approach (2015) Eng. Fract. Mech., 142, pp. 154-169
dc.relation.referencesHuang, B., Shu, X., Tang, Y., (2005), pp. 177-188. , Comparison of semi-circular bending and indirect tensile strength tests for HMA mixtures, in Geo-Frontiers 2005, American Society of Civil Engineers, Austin, Texas 10.1061/40776(155)14
dc.relation.referencesVan de Ven, R., Smit, M., Krans, A., Possibilities of a semi-circular bending test (1997) Eighth Int Conf. Asph. Pavements, Seattle, pp. 939-950. , https://trid.trb.org/view/501673
dc.relation.references(2015), MOP - DGOP - Laboratorio Nacional de Vialidad, Volumen 8. Especificaciones y métodos de muestreo, ensaye y control, 8.302.35 Asfaltos: Método para determinar el contenido de ligante mediante el equivalente centrífugo de kerosene (ECK), Edición 20, Santiago de Chile
dc.relation.referencesLu, D.X., Bui, H.H., Saleh, M., Effects of specimen size and loading conditions on the fracture behaviour of asphalt concretes in the SCB test (2021) Eng. Fract. Mech., 242, pp. 1-16
dc.relation.referencesFairbairn, E.M.R., (2002), A Tribute to Fernando L. L. B. Carneiro (1913 - 2001) Engineer and Scientist who invented the Brazilian Test, Mater. Struct. 35 195–196. 10.1617/13888
dc.relation.referencesGu, F., Chen, C., Yin, F., West, R.C., Taylor, A., Development of a new cracking index for asphalt mixtures using indirect tensile creep and strength test (2019) Constr. Build. Mater., 225, pp. 465-475
dc.relation.referencesChong, M., Kuruppu, K.P., New specimen for fracture toughness determination for rock and other materials (1984) Int. J. Fract., 26, pp. 59-62
dc.relation.referencesBiligiri, K.P., Said, S., Hakim, H., Asphalt mixtures'crack propagation assessment using semi-circular bending tests (2012) Int. J. Pavement Res. Technol., 5, pp. 209-217
dc.relation.referencesKuruppu, M.D., Obara, Y., Ayatollahi, M.R., Chong, K.P., Funatsu, T., ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen (2014) Rock Mech. Rock Eng., 47, pp. 267-274
dc.relation.references(2011), AENOR, EN 12697-44-Bituminous mixtures - Test methods - Part 44: Crack propagation by semi-circular bending test
dc.relation.referencesVasconcelos, K.L., Bernucci, L.B., Effect of temperature on the indirect tensile strength test of (2012) Eurasphalt Eurobitume Congr., pp. 13-15
dc.relation.referencesSi, W., Li, N., Ma, B., Xiang Tian, Y., Yan Zhou, X., Temperature response to tensile characteristics of the hot asphalt mixtures (2016) KSCE J. Civ. Eng., 20, pp. 1336-1346
dc.relation.referencesGujarati, D., Porter, D., Econometría (2009), 5th ed. México D.F Mc Graw Hill
dc.relation.referencesMarín-Uribe, C., Pavimentos articulados de bloques asfálticos con RAP y verificación de su desempeño a través de un modelo físico experimental (2016) Pontificia Universidad Católica de Chile, , https://repositorio.uc.cl/handle/11534/21386
dc.relation.referencesChatterjee, S., Simonoff, J.S., (2013) Handbook of Regression Analysis
dc.relation.referencesAsuero, A.G., Sayago, A., González, A.G., The correlation coefficient: an overview (2006) Crit. Rev. Anal. Chem., 36, pp. 41-59
dc.relation.referencesFaraway, J., Linear models with R (2014), Taylor & Francis Second
dc.relation.referencesBoard, A., (2011), Regression: linear models in statistics 10.5860/choice.48-4532
dc.relation.referencesAparicio, J., Martínez Mayoral, M.A., Morales, J., Modelos lineales aplicados en R (2018) Universidad Miguel Hernández
dc.relation.referencesArdiansyah, M.M., Mardhia, S., (2018), Handayaningsih, Analogy-based model for software project effort estimation, Int. J. Adv. Intell. Informatics. 4 251–260. 10.26555/ijain.v4i3.266
dc.relation.referencesYao, W., Jiang, S., Fei, W., Cai, T., Correlation between the compressive, tensile strength of old concrete under marine environment and prediction of long-term strength (2017) Adv. Mater. Sci. Eng., 2017
dc.type.coarhttp://purl.org/coar/resource_type/c_6501
dc.type.versioninfo:eu-repo/semantics/publishedVersion
dc.type.driverinfo:eu-repo/semantics/article
dc.identifier.reponamereponame:Repositorio Institucional Universidad de Medellín
dc.identifier.repourlrepourl:https://repository.udem.edu.co/
dc.identifier.instnameinstname:Universidad de Medellín


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem