Show simple item record

dc.creatorGuerra L.
dc.creatorEcheverría F.
dc.creatorCorrea E.
dc.descriptionAbstract: Electroless Ni B coatings using DMAB-reduced plating baths at different pH conditions were formed on AISI/SAE 1045 carbon steel. Substrates were grit-blasted with alumina, generating a rough surface suitable for anchorage and nucleation of the coating. The surface of the substrates were examined at selected times of electroless treatment using scanning electron microscopy. The structure of the coating was studied by means of X-ray diffraction. A low-cost boron determination procedure was implemented in order to determine the amount of boron incorporated into the electroless coatings. Coatings nucleate faster at acid and neutral pH conditions; however, at the end of the plating process all coatings were adherent, with the typical morphology of Ni B electroless coatings. Substrates slightly corroded inside the plating bath at acid pH condition. The amount of boron into the coatings was approximately 2.15, 2.14 and 1.10% (wt%) for the acid, neutral and alkaline pH plating baths, respectively. Graphic Abstract: [Figure not available: see fulltext.]. © 2019, The Korean Institute of Metals and Materials.
dc.publisherKorean Institute of Metals and Materials
dc.sourceMetals and Materials International
dc.subjectContact plating
dc.subjectFerrous alloys
dc.subjectNi B coatings
dc.titleEffect of pH on Dimethylamine Borane Reduced Electroless Nickel Deposits on AISI/SAE 1045 Steel Surface
dc.publisher.programIngeniería de Materiales
dc.publisher.facultyFacultad de Ingenierías
dc.affiliationGuerra, L., Centro de Investigación, Innovación y Desarrollo de Materiales CIDEMAT, Facultad de Ingeniería, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia; Echeverría, F., Centro de Investigación, Innovación y Desarrollo de Materiales CIDEMAT, Facultad de Ingeniería, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia; Correa, E., Grupo de Investigación Materiales con Impacto MAT&MPAC, Facultad de Ingenierías, Universidad de Medellín, Carrera 87 No 30 65, Medellín, Colombia
dc.relation.referencesVitry, V., Bonin, L., Effect of temperature on ultrasound-assisted electroless nickel-boron plating (2019) Ultrason. Sonochem., 56, pp. 327-336
dc.relation.referencesHuang, Z., Nguyen, T.T., Zhou, Y., Qi, G., A low temperature electroless nickel plating chemistry (2019) Surf. Coat. Technol., 372, pp. 160-165
dc.relation.referencesTa?ci, S., Özden, R.C., Anik, M., Corrosion and wear characteristics of electroless Ni P, Ni P W and composite Ni P W/Al2O3 coatings on AZ91 sheet (2019) Met. Mater. Int., 25, pp. 313-323
dc.relation.referencesThakur, A., Gharde, S., Kandasubramanian, B., Electroless nickel fabrication on surface modified magnesium substrates (2019) Def. Technol., 1, p. 11
dc.relation.referencesQian, W., Wei, H., Chen, H., The effect of heat treatment on Ni B Ce electroless coatings (2019) Surf. Eng., 35, pp. 144-152
dc.relation.referencesMukhopadhyay, A., Barman, T.K., Sahoo, P., Tribological behavior of sodium borohydride reduced electroless nickel alloy coatings at room and elevated temperatures (2017) Surf. Coat. Technol., 321, pp. 464-476
dc.relation.referencesMukhopadhyay, A., Barman, T.K., Sahoo, P., Tribological characteristics of electroless Ni B Mo coatings at different operating temperatures (2019) Surf. Rev. Lett., 26, p. 1850175
dc.relation.referencesMukhopadhyay, A., Barman, T.K., Sahoo, P., Friction and wear performance of electroless Ni B coatings at different operating temperatures (2019) Silicon, 11, pp. 721-731
dc.relation.referencesChiba, A., Haijima, H., Wu, W., Effect of sonication on the electroless Ni B deposited powder from acid bath (2004) Ultrasonics, 42, pp. 617-620
dc.relation.referencesDabalà, M., Brunelli, K., Frattini, R., Magrini, M., Surface hardening of Ti 6Al 4V alloy by diffusion treatment of electroless Ni B coatings (2004) Surf. Eng., 20, pp. 103-107
dc.relation.referencesRha, S.-K., Baek, S.-D., Lee, Y.-S., Effects of dimethylamine borane in electroless Ni B plating (2015) J. Nanosci. Nanotechnol., 15, pp. 7444-7450
dc.relation.referencesHamid, Z.A., Hassan, H.B., Attyia, A.M., Influence of deposition temperature and heat treatment on the performance of electroless Ni B films (2010) Surf. Coat. Technol., 205, pp. 2348-2354
dc.relation.referencesDomínguez-Ríos, C., Hurtado-Macias, A., Torres-Sánchez, R., Measurement of mechanical properties of an electroless Ni B coating using nanoindentation (2012) Ind. Eng. Chem. Res., 51, pp. 7762-7768
dc.relation.referencesBaskaran, I., Sankara Narayanan, T.S.N., Stephen, A., Corrosion resistance of electroless Ni low B coatings (2009) Trans. IMF, 87, pp. 221-224
dc.relation.referencesAnik, M., Körpe, E., ?en, E., Effect of coating bath composition on the properties of electroless nickel boron films (2008) Surf. Coat. Technol., 202, pp. 1718-1727
dc.relation.referencesDas, S.K., Sahoo, P., Influence of process parameters on microhardness of electroless Ni B coatings (2012) Adv. Mech. Eng., 4, p. 703168
dc.relation.referencesWang, Z.C., Jia, F., Yu, L., Direct electroless nickel boron plating on AZ91D magnesium alloy (2012) Surf. Coat. Technol., 206, pp. 3676-3685
dc.relation.referencesCai, Y., Chang, Z.Z., Chen, C.M., Complexing agent on the surface of magnesium alloy plating of Ni B alloy (2011) Adv. Mater. Res., 311-313, pp. 327-330
dc.relation.referencesChang, Q.H., Chang, Z.Z., Bai, Y.T., The effect of NaOH on the surface of magnesium alloy Ni B alloy plating properties (2011) Adv. Mater. Res., 189-193, pp. 347-350
dc.relation.referencesVitry, V., Kanta, A.-F., Delaunois, F., Application of nitriding to electroless nickel boron coatings: chemical and structural effects
dc.relation.referencesmechanical characterization
dc.relation.referencescorrosion resistance (2012) Mater. Des., 39, pp. 269-278
dc.relation.referencesVitry, V., Sens, A., Kanta, A.-F., Delaunois, F., Experimental study on the formation and growth of electroless nickel boron coatings from borohydride-reduced bath on mild steel (2012) Appl. Surf. Sci., 263, pp. 640-647
dc.relation.referencesVitry, V., Sens, A., Kanta, A.-F., Delaunois, F., Wear and corrosion resistance of heat treated and as-plated duplex NiP/NiB coatings on 2024 aluminum alloys (2012) Surf. Coat. Technol., 206, pp. 3421-3427
dc.relation.referencesBrunelli, K., Dabalà, M., Dughiero, F., Magrini, M., Diffusion treatment of Ni B coatings by induction heating to harden the surface of Ti 6Al 4V alloy (2009) Mater. Chem. Phys., 115, pp. 467-472
dc.relation.referencesGilley, K.L., Nino, J.C., Riddle, Y.W., Heat treatments modify the tribological properties of nickel boron coatings (2012) ACS Appl. Mater. Interfaces, 4, pp. 3069-3076
dc.relation.referencesSrinivasan, K.N., Meenakshi, R., Santhi, A., Studies on development of electroless Ni B bath for corrosion resistance and wear resistance applications (2010) Surf. Eng., 26, pp. 153-158
dc.relation.referencesVitry, V., Kanta, A.-F., Delaunois, F., Evolution of reactive concentration during borohydride-reduced electroless nickel boron plating and design of a replenishment procedure (2012) Ind. Eng. Chem. Res., 51, pp. 9227-9234
dc.relation.references(2011) Standard Terminology Relating to Electroplating, , ASTM B374-06, West Conshohocken
dc.relation.referencesWang, H.-Y., Chung, S.-T., Chuang, Y.-C., Tsai, W.-T., Electroless Ni B deposition from an emulsified supercritical carbon dioxide bath (2010) Thin Solid Films, 518, pp. 7505-7508
dc.relation.referencesBlumenthal, H., Fall, W., Potentiometric determination of boron in nickel boride (1953) Anal. Chem., 25, pp. 1120-1122
dc.relation.references(2016) Standard guide for determining mass per unit area of electrodeposited and related coatings by gravimetric and other chemical analysis procedures, , ASTM B767-88, West Conshohocken
dc.relation.referencesVitry, V., Kanta, A.-F., Delaunois, F., Initiation and formation of electroless nickel boron coatings on mild steel: effect of substrate roughness (2010) Mater. Sci. Eng. B, 175, pp. 266-273
dc.relation.referencesBagheri, S., Guagliano, M., Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys (2009) Surf. Eng., 25, pp. 3-14
dc.relation.referencesLee, S.B., Kim, Y.-M., Signature of surface energy dependence of partial dislocation slip in a gold nanometer-sized protrusion (2011) Scr. Mater., 64, pp. 1125-1128
dc.relation.referencesPourbaix, M., (1974) Atlas of Electrochemical Equilibria in Aqueous Solutions, , National Association of Corrosion Engineers, Houston
dc.relation.references(2015) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use, , ASTM, West Conshohocken
dc.relation.referencesKhalili, K., Safaei, M., FEM analysis of edge preparation for chamfered tools (2009) Int. J. Mater. Form., 2, pp. 217-224
dc.relation.referencesYamamoto, T., Nagayama, T., Nakamura, T., Thermal Expansion and Thermal Stress Behavior of Electroless-Plated Fe Ni B Alloy Thin Film for High-Density Packaging (2019) J. Electrochem. Soc., 166, pp. D3238-D3245
dc.relation.referencesAgarwala, R.C., Agarwala, V., Electroless alloy/composite coatings: a review (2003) Sadhana, 28, pp. 475-493
dc.relation.referencesBeygi, H., Vafaeenezhad, H., Sajjadi, S.A., Modeling the electroless nickel deposition on aluminum nanoparticles (2012) Appl. Surf. Sci., 258, pp. 7744-7750
dc.relation.referencesYoon, J.-W., Koo, J.-M., Kim, J.-W., Effect of boron content in electroless Ni B layer on plating layer properties and soldering characteristics with Sn Ag solder (2008) J. Alloys Compd., 466, pp. 73-79
dc.relation.referencesKrishnaveni, K., Sankara Narayanan, T.S.N., Seshadri, S.K., Electroless Ni B coatings: preparation and evaluation of hardness and wear resistance (2005) Surf. Coat. Technol., 190, pp. 115-121
dc.relation.referencesNarayanan, T.S.N.S., Krishnaveni, K., Seshadri, S.K., Electroless Ni P/Ni B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance (2003) Mater. Chem. Phys., 82, pp. 771-779
dc.relation.referencesGaevskaya, T.V., Novotortseva, I.G., Tsybulskaya, L.S., The effect of boron on the microstructure and properties of electrodeposited nickel films (1996) Met. Finish., 94, pp. 100-103
dc.relation.referencesZheng, L., Peng, X., Temperature-dependent thermal and chemical stabilities as well as mechanical properties of electrodeposited nanocrystalline Ni (2018) Met. Mater. Int., 24, pp. 1293-1302
dc.relation.referencesLiu, S., Zhou, W., Yu, T., Preparation of layered nanoporous Ti/TiO2/Ni W B electrode for electrocatalytic reduction of coal (2014) Fuel, 134, pp. 151-158
dc.relation.referencesSalicio-Paz, A., Grande, H., Pellicer, E., Monolayered versus multilayered electroless NiP coatings: impact of the plating approach on the microstructure, mechanical and corrosion properties of the coatings (2019) Surf. Coat. Technol., 368, pp. 138-146
dc.relation.referencesChoi, J.W., Hwang, G.H., Han, W.K., Kang, S.G., Phase transformation of Ni B, Ni P diffusion barrier deposited electrolessly on Cu interconnect (2006) Appl. Surf. Sci., 253, pp. 2171-2178
dc.relation.referencesOwen, B.B., The dissociation constant of boric acid from 10 to 50° (1934) J. Am. Chem. Soc., 56, pp. 1695-1697
dc.relation.referencesAzevedo, M.C.C., Cavaleiro, A.M.V., The acid base titration of a very weak acid: boric acid (2012) J. Chem. Educ., 89, pp. 767-770
dc.relation.referencesKnoeck, J., Taylor, J.K., Aqueous boric acid-borate-mannitol equilibriums (1969) Anal. Chem., 41, pp. 1730-1734
dc.relation.referencesHollander, M., Rieman, W., III, Titration of boric acid in presence of mannitol (1945) Ind. Eng. Chem. Anal. Ed., 17, pp. 602-603
dc.relation.referencesBalintova, M., Petrilakova, A., Study of pH influence on the selective precipitation of heavy metals from acid mine drainage (2011) Chem. Eng. Trans., 25, pp. 345-350

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record