Show simple item record

dc.creatorHidalgo C.A.
dc.creatorBustamante-Hernández J.J.
dc.date2020
dc.date.accessioned2021-02-05T14:57:46Z
dc.date.available2021-02-05T14:57:46Z
dc.identifier.issn20711050
dc.identifier.urihttp://hdl.handle.net/11407/5909
dc.descriptionThe tires used constitute an environmental problem that remains unsolved. It is observed that the automotive fleet and therefore the generation of tires increases year after year, so the recovery and reuse processes are insufficient. For several years, the reuse of tires as materials in the construction has been considered, and several techniques have been developed for the construction of retaining walls and road reinforcement. However, to date, their use remains sporadic. This article presents the theoretical and experimental evaluation of a new geotechnical reinforcement system from used tires. This system, suitable for the construction of containment structures and the reinforcement of roads, is characterized by the conformation of cells that do not require other elements apart from the tires and the filling material. A mathematical model was developed to describe the behavior of the system and pullout tests were carried out for validation. The tests were performed with different tire and compacted granular material with different energies. The results allow validating the theoretical model by showing an increase in pullout resistance with the density and number of tires in the arrangement. It is observed that the coincidence between the model and the tests improves as the stiffness of the soil increases, being the degree of compaction fundamental for the operation. © 2020 by the authors.
dc.language.isoeng
dc.publisherMDPI AG
dc.relation.isversionofhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85086358981&doi=10.3390%2fsu12114582&partnerID=40&md5=61feea06349b1a3590a737f564fbe5e5
dc.sourceSustainability (Switzerland)
dc.subjectExperimentalspa
dc.subjectPullout resistancespa
dc.subjectSoil reinforcementspa
dc.subjectUsed tiresspa
dc.titleA new sustainable geotechnical reinforcement system from old tires: Experimental evaluation by pullout tests
dc.typeArticleeng
dc.rights.accessrightsinfo:eu-repo/semantics/restrictedAccess
dc.publisher.programIngeniería Civilspa
dc.identifier.doi10.3390/su12114582
dc.subject.keywordcompactioneng
dc.subject.keywordenvironmental issueeng
dc.subject.keywordexperimental studyeng
dc.subject.keywordgranular mediumeng
dc.subject.keywordmodel validationeng
dc.subject.keywordrecyclingeng
dc.subject.keywordreinforcementeng
dc.subject.keywordretaining walleng
dc.subject.keywordroadeng
dc.subject.keywordstiffnesseng
dc.subject.keywordsustainabilityeng
dc.subject.keywordtireeng
dc.relation.citationvolume12
dc.relation.citationissue11
dc.publisher.facultyFacultad de Ingenieríasspa
dc.affiliationHidalgo, C.A., School of Engineering, Civil Engineering Program at Universidad de Medellin, Medellin, 050030, Colombia
dc.affiliationBustamante-Hernández, J.J., School of Engineering, Civil Engineering Program at Universidad de Medellin, Medellin, 050030, Colombia
dc.relation.referencesSienkiewicz, M., Kucinska-Lipka, J., Janik, H., Balas, A., Progress in used tyres management in the European Union: A review (2012) Waste Manag, 32, pp. 1742-1751
dc.relation.referencesDerakhshan, Z., Ghaneian, M.T., Mahvi, A.H., Conti, G.O., Faramarzian, M., Dehghani, M., Ferrante, M., A new recycling technique for the waste tires reuse (2017) Environ. Res, 158, pp. 462-469
dc.relation.referencesMachin, E.B., Pedroso, D.T., de Carvalho, J.A., Energetic valorization of waste tires (2017) Renew. Sustain. Energy Rev, 68, pp. 306-315
dc.relation.referencesCheng, X., Song, P., Zhao, X., Peng, Z., Wang, S., Liquefaction of ground tire rubber at low temperature (2018) Waste Manag, 71, pp. 301-310
dc.relation.referencesRanieri, L., Digiesi, S., Silvestri, B., Roccotelli, M., A Review of Last Mile Logistics Innovations in an Externalities Cost Reduction Vision (2018) Sustainability, 10, p. 782
dc.relation.referencesBurkhanbekov, K., Aubakirov, Y., Tashmukhambetova, Z., Abildin, T., Thermal processing of waste tires with heavy oil residue in the presence of Tayzhuzgen zeolite (2019) J. Mater. Cycles Waste Manag, 21, pp. 633-641
dc.relation.referencesLuo, S., Feng, Y., The production of fuel oil and combustible gas by catalytic pyrolysis of waste tire using waste heat of blast-furnace slag (2017) Energy Convers. Manag, 136, pp. 27-35
dc.relation.referencesCzajczynska, D., Krzyzynska, R., Jouhara, H., Spencer, N., Use of pyrolytic gas from waste tire as a fuel: A review (2017) Energy, 134, pp. 1121-1131
dc.relation.referencesTorretta, V., Rada, E.C., Ragazzi, M., Trulli, E., Istrate, I.A., Cioca, L.I., Treatment and disposal of tyres: Two EU approaches. A review (2015) Waste Manag, 45, pp. 152-160
dc.relation.referencesShu, X., Huang, B., Recycling of waste tire rubber in asphalt and portland cement concrete: An overview (2014) Constr. Build. Mater, 67, pp. 217-224
dc.relation.referencesSayào, A., Gerscovich, D., Medeiros, L., Sieira, A., Scrap Tire-An Attractive Material for Gravity Retaining Walls and Soil Reinforcement (2009) J. Solid Waste Technol. Manag, 35, pp. 135-155
dc.relation.references(2019) Ministerio de Ambiente y Desarrollo Sostenible, Ministerio de Ambiente y Desarrollo Sostenible 2017, , http://www.minambiente.gov.co, (accessed on 24 October)
dc.relation.referencesPark, J., Díaz-Posada, N., Mejía-Dugand, S., Challenges in implementing the extended producer responsibility in an emerging economy: The end-of-life tire management in Colombia (2018) Clean. Prod, 189, pp. 754-762
dc.relation.referencesUriarte-Miranda, M.-L., Caballero-Morales, S.-O., Martinez-Flores, J.-L., Cano-Olivos, P., Akulova, A.-A., Reverse Logistic Strategy for the Management of Tire Waste in Mexico and Russia: Review and Conceptual Model (2018) Sustainability, 10, p. 3398
dc.relation.referencesOrtíz-Rodríguez, O.O., Ocampo-Duque, W., Duque-Salazar, L.I., Environmental Impact of End-of-Life Tires: Life Cycle Assessment Comparison of Three Scenarios from a Case Study in Valle Del Cauca, Colombia (2017) Energies, 10, p. 2117
dc.relation.referencesGiraldo, J.C., Suárez, A.F., Hidalgo, C., (2004) Valoración de Residuos de Neumáticos Como Sustituto o Complemento de Agregado Grueso en Materiales Para Base Granular o Relleno;, , University of Medelllín: Antioquia, Colombia
dc.relation.referencesYoon, S., Prezzi, M., Zia Siddiki, N., Kim, B., Construction of a test embankment using a sand-tire shred mixture as fill material (2005) Waste Manag, 26, pp. 1033-1044
dc.relation.referencesShalaby, A., Khan, R.A., Design of unsurfaced roads constructed with large-size shredded rubber tires: A case study (2005) Resour. Conserv. Recycl, 44, pp. 318-332
dc.relation.referencesGhazavi, M., Sakhi, M., Influence of optimized tire shreds on shear strength parameters of sand (2005) Int. J. Geotech, 5, pp. 58-65
dc.relation.referencesHumphrey, D., Sandford, T., Cribbs, M., Manison, W., Shear strength and compressibility of tire chips for use as retaining wall backfill (1993) Transp. Res. Rec, 1422, pp. 29-35
dc.relation.referencesFoose, G., Benson, C., Bosscher, P., Sand reinforced with shredded waste (1996) J. Geotech. Eng, 122, pp. 760-767
dc.relation.referencesWu, W., Benda, C., Cauley, R., Triaxial determination of shear strength of tire chips (1997) J. Geotech. Geoenviron. Eng, 123, pp. 479-482
dc.relation.referencesTatlisoz, N., Edil, T., Benson, C., Interaction between reinforcing geosynthetics and soil-tire chip mixtures (1998) J. Geotech. Geoenviron. Eng, 124, pp. 1109-1119
dc.relation.referencesEdinçliler, A., Using waste tire-soil mixtures for embankment construction. international workshop on scrap tire derived geomaterials "opportunities and challenges" (2007) Kanto Branch Jpn. Geotech. Soc, pp. 319-328
dc.relation.referencesYoon, Y.W., Cheon, S.H., Kang, D.S., Bearing capacity and settlement of tyre-reinforced sands (2004) Geotext. Geomembr, 22, pp. 439-453
dc.relation.referencesYoon, Y.W., Heo, S.B., Kim, K.S., Geotechnical performance of waste tires for soil reinforcement from chamber tests (2008) Geotext. Geomembr, 26, pp. 100-107
dc.relation.referencesHuat, B.B., Aziz, A.A., Chuan, L.W., Application of scrap tires as earth reinforcement for repair of tropical residual soil slope (2008) Electron. J. Geotech. Eng, 13, pp. 1-9
dc.relation.referencesEdinçliler, A., Baykal, G., Saygili, A., Influence of different processing techniques on the mechanical properties of used tires in embankment construction (2010) Waste Manag, 30, pp. 1073-1080
dc.relation.referencesKim, K.S., Yoon, Y.W., Yoon, G.L., Pullout behavior of cell-type tyres in reinforced soil structures (2011) KSCE J. Civ. Eng, 15, pp. 1209-1217
dc.relation.referencesLi, L., Xiao, H., Ferreira, P., Cui, X., Study of a small scale tyre-reinforced embankment (2016) Geotext. Geomembr, 44, pp. 201-208
dc.relation.referencesLi, L.H., Chen, Y.J., Ferreira, P.M., Liu, Y., Xiao, H.L., Experimental investigations on the pull-out behavior of tire strips reinforced sands (2017) Materials, 10, p. 707
dc.relation.referencesBustamante, J., (2016) Evaluación de un Sistema de Refuerzo de Suelo Utilizando Llantas en Desuso Para Carreteras Terciarias;, , University of Medellín: Medellín, Colombia
dc.relation.referencesLoaiza, T., (2017) Evaluación del Proceso Constructivo de un Muro de Contención Mediante un Sistema de Refuerzo de Suelo Utilizando Llantas en Desuso;, , University of Medellín: Medellín, Colombia
dc.relation.referencesJimenez, M., (2018) Evaluación Tècnica, Ambiental y Econòmica en la Construction de Muros de Contention, Innovando el Uso de Reciclaje de Neumáticos;, , University of Medellín: Medellín, Colombia
dc.relation.referencesMarín, F., (2018) Evaluación experimental de la resistencia al arrancamiento de un sistema de refuerzo de suelo Utilizando Llantas en Desuso;, , University of Medellín: Medellín, Colombia
dc.relation.referencesTajabadipour, M., Dehghani, M., Kalantari, B., Lajevardi, S.H., Laboratory pullout investigation for evaluate feasibility use of scrap tire as reinforcement element in mechanically stabilized earth walls (2019) J. Clean. Prod, 237, p. 117726
dc.relation.referencesEdil, T.B., A review of environmental impacts and environmental applications of shredded scrap tires (2008) Proceedings of the International Workshop on Scrap Tire derived Geomaterials, pp. 3-18. , Yokosuka, Japan, 23-24 March Hazarika, H., Yasuhara, K., Eds.
dc.relation.referencesTaylor and Francis: London, UK
dc.relation.referencesHennebert, P., Lambert, S., Fouillen, F., Charrasse, B., Assessing the Environmental Impact of Shredded Tires as Embankment Fill Material (2014) Can. Geotech. J, 51, pp. 469-478
dc.relation.referencesTatlisoz, N., Edil, T.B., Benson, C.H., Park, J.K., Kim, J.Y., Review of environmental suitability of scrap tires (1996) Environmental Geotechnics Report No: 96-97;, , Department of Civil and Environmental Engineering, University of Wisconsin: Madison, WI, USA
dc.relation.referencesO'Shaughnessy, V., Garga, K.V., Tire-reinforced earthfill. Part 2: Pull-out behaviour and reinforced slope design (2000) Can. Geotech. J, 37, pp. 97-116
dc.type.versioninfo:eu-repo/semantics/publishedVersion
dc.type.driverinfo:eu-repo/semantics/article


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record